Seeeduino LoRaWAN W/GPS Dev Board

Seeeduino LoRaWAN W/GPS Dev Board

R 1,448.83



Seeeduino LoRaWAN W/GPS is an Arduino development board with LoRaWan protocol and GPS function embedded, through which you can get started quickly to experience LoRa's advantage in the field of IoT. The 4 onboard standard grove connectors allow Seeeduino LoRaWan to connect with hundreds of grove sensors and actuators for Seeeduino conveniently. As a result users are able to be more focus on the application itself without worrying about the compatibility issue between different modules.

Highlighted Features

  • Based on communication module RHF76-052AM
  • Seeeduino LoRaWAN is compatible with LoRaWAN Class A/C
  • Supports a variety of communication frequencies
  • The board has embedded an integrated lithium battery management chip that allows the board to be charged by USB interface
  • In low consumption mold, a full charged lithium battery can power the board for several months
  • By using Seeeduino LoRaWAN W/GPS, you can build an IoT application very quickly
  • We also offer another version that without the embedded GPS module
  • Ultra long range of communication
  • Ultra low power consumption
  • Minimum current (3.7V lipo battery & remove PWR LED)
  • Firmware upgrade available


  • Arduino/Processor: ATSAMD21G18 @ 48MHz with 3.3V logic/power
  • Arduino compatible (based on Arduino Zero bootloader)
  • Embedded with lithium battery management chip and status indicator LED
  • 20 GPIO's and 4 on-board Grove connectors
  • 18 x PWM pins (All but pins 2 and 7)
  • 6 x analog inputs, 12-bit ADC channels 1 x analog output (A0) 10-bit DAC
  • 3.3V regulator with 200mA output Reset button
  • LoRaWAN/RHF76-052: 1.45uA sleep current in WOR mode (Spec of the modules, not the board)
  • High link budget of 160dB. -140dBm sensitivity and 19dBm Output power
  • Dual band, 434/470MHz and 868/915MHz
  • 19dBm@434MHz/470MHz, 14dBm@868MHz/915MHz
  • Small size: 23mm X 28mm with 33 pin SMT package
  • SRAM 32 KB, Flash Memory 256 KB
  • ATSAMD21G18, 32-Bit ARM Cortex M0+ Microcontroller 
  • UART 2 (Native and Programming)
  • Clock Speed 48 MHz
  • External Interrupts: All pins except pin 4
  • Dimensions 140mm x76mm x26mm