This WioHeliumMonitor is a plug-and-play LongFi hotspot monitor for the Helium network. It will tell you if your hotspot is continuously reachable from the local network/LAN connection is working, as well as if your hotspot is continuously accessing the Internet/Internet connection is working correctly.
Highlighted Features
- Long Range Hotspot Monitoring: this product is to monitor your Helium Hotspot in real-time and remotely.
- plug-and-play: Compact size makes it easier to bring the device anywhere.
- Reporting misinformation with APP: WioHeliumMonitor reports information locally and remotely with the Watchium application.
- Alarm to Remind: any problem detected will raise a local alarm sound.
- Friendly Interface Display: Directly display network and hotspot information on the Wio Terminal screen.
Specifications
Wio Terminal
|
Main Chip |
Manufacturer Part Number |
ATSAMD51P19 |
|
Core Processor |
ARM® Cortex®-M4F running at 120MHz |
|
|
Memory |
4 MB External Flash, 192 KB RAM |
|
|
Maximum Speed |
200MHz |
|
|
External Flash |
4MBytes |
|
|
Operating Temperature |
-40°C ~ 85°C (TA) |
|
|
LCD Screen |
Resolution |
320x240 |
|
Display Size |
2.4inch |
|
|
Drive IC |
ILI9341 |
|
|
Wireless Connectivity |
Manufacturer Part Number |
RTL8720DN |
|
KM4 CPU |
ARM® Cortex®-M4F @ 200MHz |
|
|
KM0 CPU |
ARM® Cortex®-M0 |
|
|
Wi-Fi |
802.11 a/b/g/n 1x1, Dual Band 2.4GHz & 5GHz |
|
|
Bluetooth |
Support BLE5.0 |
|
|
Built-in Modules |
Accelerometer |
LIS3DHTR |
|
Microphone |
1.0V-10V -42dB |
|
|
Speaker |
≥78dB @10cm 4000Hz |
|
|
Light Sensor |
400-1050nm |
|
|
Infrared Emitter |
940nm |
|
|
Interface |
MicroSD Card Slot |
Maximum 16GB |
|
GPIO |
40-PIN (Raspberry Pi Compatible) |
|
|
Supported Protocol |
SPI, I2C, I2S, ADC, DAC, PWM, UART(Serial) |
|
|
Grove |
2 (Multifunction), for Digital, Analog, I2C, and PWM |
|
|
FPC |
20-Pins |
|
|
USB Type-C |
Power & USB-OTG |
|
|
Operation Interface |
5-Way Switch |
|
|
Power/Reset Switch |
||
|
User-defined button *3 |
||
|
Enclosure |
Mounting |
Built-in magnets and two mounting holes |
|
Dimension |
72mm*57mm*12mm |
|
|
Materials |
ABS+PC |
|
|
Software Support |
Arduino |
|
|
MicroPython |
||
|
ArduPy |
||
|
AT Firmware |
||
|
Visual Studio Code |
||
Grove - Wio-E5
| Voltage Supply: | 3.3V / 5V |
| Power Output: | Up to +20 dBm at 3.3V |
| Working Frequency | 868MHz / 915MHz |
| Protocol | LoRaWAN |
| Sensitivity | -116.5dBm ~ -136dBm |
| Modulation | Long Range , (G)FSK, (G)MSK and BPSK |
| Current | Only 60uA in sleep mode |
| Size | 20*40mm |
| Working Temperature | -40℃ ~ 85℃ |